Induction Quenching fluid KR6480

It effectively improves the heat treatment work environment and enhances the quenching quality of parts.

Category: Induction Quenching fluid, Water-soluble quenching liquid

Product Details

Advantages

Effectively reduces quenching deformation of workpieces, prevents cracking during water quenching, and ensures high, uniform hardness after quenching | By adjusting the concentration of the quenching fluid, different cooling rates can be achieved | Excellent rust and corrosion protection for parts, quenching tanks, and cooling circulation systems | Resistant to aging and degradation, with a long service life | Non-flammable, no smoke, no fire hazard, and a clean production environment | Green, environmentally friendly, and pollution-free.

Technical Specifications

Model	KR6480
Concent Ration	wt % >= 3-20
Kinematic Viscosity	(40°C,10%) mm2/s 1.84
Operating Temperature	°C 10-45
Application Range	Suitable for quenching, induction heating quenching, and carburizing quenching of large and medium-sized components with medium-low hardenability, including standards like 15, 20, 35, 45, 40Cr, 35CrMo, and 40MnB, as well as shafts, forgings, and gears.

Storage Conditions

Item	Requirements
Storage Temperature	5–40°C. Indoor storage is recommended. Protect from freezing, as freezing may damage the polymer system.
Packaging & Container Requirements	Packaged in 200 L plastic drums with a net weight of 200 kg per drum; 25 kg plastic pails or 1,000 kg intermediate bulk containers (IBCs) may also be used.
Shelf Life	2 years. After expiry, the product may only be used after it has been retested and confirmed to meet specifications.
Key Properties (KR9988)	Appearance: light yellow to pale red viscous liquid; pH (5% solution): 9.5–10.5; kinematic viscosity (10% solution at 40°C): 3.19 mm²/s.
Precautions	Nonflammable and presents no fire hazard; nevertheless, keep the container tightly sealed. If stored outdoors, place the drum horizontally to prevent water, dust, and other contaminants from entering. Retighten the cap immediately after dispensing. Check the concentration with a refractometer before use. PAG-containing products exhibit reverse solubility; polymer separation at elevated temperatures is normal, and the product can be restored by cooling and stirring.