Opens in a new tab
Thin-layer Antirust Oil KR-AOD330PLUS | Rust Prevention Oil |

Water-displacing Agent KR-AOD100

This multifunctional oil provides dehydration and cleaning capabilities, effectively removing water films from metal surfaces while quickly forming a thin rust-preventive oil layer to protect against corrosion.

Product Details

Advantages

Quick dehydration with excellent water-shedding and drainage performance; outstanding anti-emulsification properties | Well-suited for non-ferrous metals | Thin oil film, low carry-off, and cost-effective usage.

Technical Specifications

Model KR-AOD100
Kinematic Viscosity (40°C) mm2/s 1.0-4.0
Application Range Excellent dewatering capability, ideal for removing rinse water to ensure final rust prevention.

Storage Conditions

Item Requirements
Storage Temperature 5–40°C. Indoor storage is recommended. Protect from freezing, as freezing may damage the polymer system.
Packaging & Container Requirements Packaged in 200 L plastic drums with a net weight of 200 kg per drum; 25 kg plastic pails or 1,000 kg intermediate bulk containers (IBCs) may also be used.
Shelf Life 2 years. After expiry, the product may only be used after it has been retested and confirmed to meet specifications.
Key Properties (KR9988) Appearance: light yellow to pale red viscous liquid; pH (5% solution): 9.5–10.5; kinematic viscosity (10% solution at 40°C): 3.19 mm²/s.
Precautions Nonflammable and presents no fire hazard; nevertheless, keep the container tightly sealed. If stored outdoors, place the drum horizontally to prevent water, dust, and other contaminants from entering. Retighten the cap immediately after dispensing. Check the concentration with a refractometer before use. PAG-containing products exhibit reverse solubility; polymer separation at elevated temperatures is normal, and the product can be restored by cooling and stirring.

Related Products

Send Your Request

Tell us about your application, process conditions, or product needs. Our technical team will get back to you shortly.
KERUN METALEX 2026 invitation. 18–21 November 2026, BITEC Bangkok, booth 101-BI36.