Opens in a new tab
Thin-layer Antirust Oil KR-AOD330PLUS | Rust Prevention Oil |

Water-based Rust Preventive For Ferrous Metals KR-AOA120

This high-performance, fully synthetic, water-based rust inhibitor forms a transparent protective film on metal surfaces, providing excellent rust protection for ferrous metals.

Product Details

Advantages

Forms a transparent protective film that is easy to clean | Excellent hard water resistance | Strong resistance to tramp oil and anti-corrosion capabilities in the tank solution | Free from nitrites, making it safe and environmentally friendly.

Technical Specifications

Model KR-AOA120
pH Value (5%) 9.0 – 11.0
Concentration (%) 3.0-10.0
Application Range Suitable for inter-process rust prevention of ferrous metals; can also be added to cleaning agents to boost rust protection.

Storage Conditions

Item Requirements
Storage Temperature 5–40°C. Indoor storage is recommended. Protect from freezing, as freezing may damage the polymer system.
Packaging & Container Requirements Packaged in 200 L plastic drums with a net weight of 200 kg per drum; 25 kg plastic pails or 1,000 kg intermediate bulk containers (IBCs) may also be used.
Shelf Life 2 years. After expiry, the product may only be used after it has been retested and confirmed to meet specifications.
Key Properties (KR9988) Appearance: light yellow to pale red viscous liquid; pH (5% solution): 9.5–10.5; kinematic viscosity (10% solution at 40°C): 3.19 mm²/s.
Precautions Nonflammable and presents no fire hazard; nevertheless, keep the container tightly sealed. If stored outdoors, place the drum horizontally to prevent water, dust, and other contaminants from entering. Retighten the cap immediately after dispensing. Check the concentration with a refractometer before use. PAG-containing products exhibit reverse solubility; polymer separation at elevated temperatures is normal, and the product can be restored by cooling and stirring.

Related Products

Send Your Request

Tell us about your application, process conditions, or product needs. Our technical team will get back to you shortly.
KERUN METALEX 2026 invitation. 18–21 November 2026, BITEC Bangkok, booth 101-BI36.