Volatile Stamping Oil KR-DS02

It provides excellent lubricating, cooling, and volatility performance, helping to extend die service life and improve the working environment.

Get a Quote Download Catalog

Category: Forming Oil, Metalworking Oil

Product Details

Advantages

Rapid heat dissipation and unique lubrication effect | Excellent extreme pressure performance, effectively preventing adhesion and extending mold life | Superb lubrication, resulting in smoother part surfaces and improved product precision | Good rust prevention, meeting short-term storage rust protection requirements.

Technical Specifications

Model	KR-DS02
Flash Point	(open, ℃) ≥ 60
Kinematic Viscosity	(40℃) mm²/s 1.1-1.7
Application Range	Suitable for fine blanking of thin sheets in precision electronics, computer parts, aluminum heat sinks, and plugs.

Storage Conditions

Item	Requirements
Storage Temperature	5–40°C. Indoor storage is recommended. Protect from freezing, as freezing may damage the polymer system.
Packaging & Container Requirements	Packaged in 200 L plastic drums with a net weight of 200 kg per drum; 25 kg plastic pails or 1,000 kg intermediate bulk containers (IBCs) may also be used.
Shelf Life	2 years. After expiry, the product may only be used after it has been retested and confirmed to meet specifications.
Key Properties (KR9988)	Appearance: light yellow to pale red viscous liquid; pH (5% solution): 9.5–10.5; kinematic viscosity (10% solution at 40°C): 3.19 mm²/s.
Precautions	Nonflammable and presents no fire hazard; nevertheless, keep the container tightly sealed. If stored outdoors, place the drum horizontally to prevent water, dust, and other contaminants from entering. Retighten the cap immediately after dispensing. Check the concentration with a refractometer before use. PAG-containing products exhibit reverse solubility; polymer separation at elevated temperatures is normal, and the product can be restored by cooling and stirring.