Centrifugal Oil Purifier KR-COP 600MT
KR-COP600MT)
The mobile centrifugal oil purifier (KR-COP600MT) uses a
gearpump for pressure. After coarse filtration, quenching oil
undergoeshigh-speed centrifugal separation, with purified oil
collected in thebuilt-in auxiliary tank. Once filled, an automatic
pump returns thepurified oil to the quenching oil tank.
Product Details
Advantages
Rotor pollution capacity: 6.33l | High precision purification, separating solid particles and | agingdegradation products. | Low energy consumption: 6kW | Continuous operation: Offline installation with no productiondis x0002 ruption. | Easy maintenance, operation, and cleaning. | Preserves oil’s physicochemical properties.
Technical Specifications
| Model | KR-COP 600MT |
|---|---|
| Equipment Dimensions | 1100 900 1500 mm |
| Power | 6 kW |
| Maximum Flow Rate | 70 L/min |
| Maximum Centrifugal Force | 2000 g (gravity acceleration) |
| Maximum Operating Temperature | <120°C (customizable to 150°C) |
| Maximum Rotor Speed | 3600 r/min |
| Maximum Rotor Oil Capacity | 6.8 L |
| Maximum Rotor Contaminant Capacity | 6.33 L |
| Operating Start Pressure | >0.3 MPa |
| Maximum Operating Pressure | 0.7 MPa |
Storage Conditions
| Item | Requirements |
| Storage Temperature | 5–40°C. Indoor storage is recommended. Protect from freezing, as freezing may damage the polymer system. |
| Packaging & Container Requirements | Packaged in 200 L plastic drums with a net weight of 200 kg per drum; 25 kg plastic pails or 1,000 kg intermediate bulk containers (IBCs) may also be used. |
| Shelf Life | 2 years. After expiry, the product may only be used after it has been retested and confirmed to meet specifications. |
| Key Properties (KR9988) | Appearance: light yellow to pale red viscous liquid; pH (5% solution): 9.5–10.5; kinematic viscosity (10% solution at 40°C): 3.19 mm²/s. |
| Precautions | Nonflammable and presents no fire hazard; nevertheless, keep the container tightly sealed. If stored outdoors, place the drum horizontally to prevent water, dust, and other contaminants from entering. Retighten the cap immediately after dispensing. Check the concentration with a refractometer before use. PAG-containing products exhibit reverse solubility; polymer separation at elevated temperatures is normal, and the product can be restored by cooling and stirring. |
Related Products
KR-PF
Precision Polishing-Filter KR-PF
A precision filter efficiently removes particles, oxides, and water from oils to
KR-ASR
Centrifugal Automatic Desludger KR-ASR
Using vertical centrifugal filtration with scraper discharge, this system efficiently separates solid
KR-LTE
Waste Evaporation Treatment System KR-LTE
Centralized Chip Process System
Centralized Chip Process System
Centralized chip process system consists of a lift and flip unit, crusher,
